Cantitate/Preț
Produs

3D Printing in Medicine: A Practical Guide for Medical Professionals

Editat de Frank J. Rybicki, Gerald T. Grant
en Limba Engleză Hardback – 12 oct 2017
This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal,  craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines are addressed, and the overall costs of a 3D printing lab and the balancing of these costs against clinical benefits are discussed. Radiologists, surgeons, and other physicians will find this book to be a rich source of information on the practicalities and expanding medical applications of 3D printing.
Citește tot Restrânge

Toate formatele și edițiile

Toate formatele și edițiile Preț Express
Paperback (1) 54465 lei  38-45 zile
  Springer International Publishing – 18 mai 2018 54465 lei  38-45 zile
Hardback (1) 82038 lei  38-45 zile
  Springer International Publishing – 12 oct 2017 82038 lei  38-45 zile

Preț: 82038 lei

Preț vechi: 86355 lei
-5%

Puncte Express: 1231

Preț estimativ în valută:
15717 17025$ 13479£

Carte tipărită la comandă

Livrare economică 06-13 mai

Preluare comenzi: 021 569.72.76

Specificații

ISBN-13: 9783319619224
ISBN-10: 3319619225
Pagini: 170
Ilustrații: VIII, 138 p. 78 illus., 77 illus. in color. With online files/update.
Dimensiuni: 178 x 254 mm
Greutate: 4.31 kg
Ediția:1st ed. 2017
Editura: Springer International Publishing
Colecția Springer
Locul publicării:Cham, Switzerland

Cuprins

1. Introduction
2. 3D printing technologies
3. Post-processingof DICOM images  
4. Establishing a 3D Service in your medical facility
5. The 3D printing lab in a radiology practice
6. Training and education of a 3D medical printing technologist  
7. Cranio-Maxillofacial 3D printing
8. 3D printing in Neurosurgery and Neurointervention
9. Cardiovascular 3D printing
10. Musculoskeletal 3D printing
11. Virtual Surgical applications 
12. Design and Fabrication of Customized Patient Devices
13. 3D printing in Radiation Oncology
14. FDA interests in the 3D printing of medical models and devices
15. Bioprinting

Notă biografică

Frank J. Rybicki, MD, PhD, is Professor and Chair of Radiology at the University of Ottawa and The Ottawa Hospital. Dr. Rybicki introduced wide-area detector CT to radiology in 2007, focused on cardiac computed tomography. Dr. Rybicki was the founding and first Chairperson of the Radiological Society of North America Special Interest Group on 3D printing and is the Editor-in-Chief of 3D Printing in Medicine.

Gerald T. Grant, DMD, MS, FACP received his D.M.D. degree from the University of Louisville, School of Dentistry in 1985 and his specialty training in Maxillofacial Prosthetics from the Naval Postgraduate Dental School, Bethesda, Maryland in 1999. He is a Diplomat of the American Board of Prosthodontics. Dr. Grant has over 15 years of experience in the use of digital design and 3D printing in customized medical and dental care in both research and application. He directed the development and was Service Chief of the 3D Medical Applications Center, Department of Radiology, at Walter Reed National Military Medical Center, one of the first and largest in-hospital services, providing medical models, surgical guides, and custom medical/dental devices world-wide to US military facilities for Wounded Warrior care. He is currently retired after 33 years from the United States Navy and is a Professor and Interim Chair of the Oral Health and Rehabilitation Department at the University of Louisville School of Dentistry where he has developed collaborative research teams with the Schools of Medicine, Engineering, and Dentistry for Advanced Digital Applications in the design and fabrication of medical devices for craniofacial reconstruction, dental restoration and rehabilitation, and recently in bio-printing/bio-fabrication.

Textul de pe ultima copertă

This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal,  craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines are addressed, and the overall costs of a 3D printing lab and the balancing of these costs against clinical benefits are discussed. Radiologists, surgeons, and other physicians will find this book to be a rich source of information on the practicalities and expanding medical applications of 3D printing.


Caracteristici

Describes the fundamentals and practical aspects of 3D printing as applied to medicine
Explains the impact of 3D printing in different fields of medical care
Reviews and summarizes the literature, identifying target groups for whom 3D printing hardware and software will be especially useful
Includes supplementary material: sn.pub/extras